AP04 Tall-Shoulder PP Airless Pump Bottle 15ml, 30ml & 50ml

Tall-Shoulder PP Airless Pump Bottle

The AP04 tall-shoulder PP airless pump bottle combines a raised shoulder sleeve with a screw-on pump assembly. The higher shoulder gives the upper section a distinct profile, while the round body keeps the design consistent across 15ml, 30ml and 50ml capacities. Each version has a 33mm diameter.

Product Specifications

• Product Type: PP airless pump bottle
• Shape: Round
• Assembly Type: Screw-on pump assembly
• MOQ: 10,000 pcs
• Sample Lead Time: 7–10 days for customized samples, depending on decoration
• Production Lead Time: 30–40 days after artwork, color and sample approval
• Delivery Packing: Standard export carton packing, suitable for palletizing

Material

• Cap: PP
• Pump: PP components with a metal spring
• Shoulder: PP
• Bottle: PP

Key Features

• Raised shoulder profile: A higher shoulder sleeve gives the pump area a distinct appearance above the bottle body.
• Screw-on pump assembly: The threaded connection allows the pump assembly to be opened for access during packaging preparation.
• Three coordinated sizes: The 15ml, 30ml and 50ml bottles share a 33mm diameter, with heights of 88mm, 110mm and 141mm.
• Lightweight PP construction: PP cap, shoulder and bottle components provide a lightweight base for custom color and decoration development.

How the Airless System Works

The AP04 tall-shoulder PP airless pump bottle uses an internal piston instead of a conventional dip tube. As formula is dispensed, the piston rises to occupy the space left behind. This helps limit repeated contact between the remaining product and outside air. Several initial presses may be needed to prime the pump. Confirm dispensing performance and dose consistency with the actual formula before production.

Customization Options

• Color: Custom injection-molded colors can coordinate the cap, shoulder and bottle with your brand design.
• Surface Finish: Discuss matte, glossy, frosted, soft-touch, metallized or gradient effects according to surface suitability and sample results.
• Logo Decoration: Evaluate silk screen printing, hot stamping, heat transfer or labeling against the available decoration area.
• Packaging Development: Coordinate decoration and packing across the chosen capacities. Confirm artwork placement separately for each bottle height.

Suitable For

AP04 can be evaluated for serums, facial lotions, eye-care formulas and moisturizers suited to airless pump dispensing. Choose the fill volume around intended use, then assess formula viscosity, ingredients and required dose in the complete pack. Compatibility and functional testing should guide final formula selection.

Why This Packaging Works

AP04 suits projects where the shoulder is intended to be a visible part of the packaging design. The raised upper section offers a different proportion from a lower-shoulder bottle, while the common diameter supports a coordinated range. The threaded pump connection also allows access during packaging preparation. Compare the three heights with your artwork and cartons, and approve filled samples to confirm both appearance and operation.

Filling & Usage Notes

• Filling Recommendation: Confirm the filling route, piston position and fill level using approved samples. Avoid trapped air and overfilling.
• Assembly: Confirm the screw-on pump assembly procedure and seating after filling. Check the shoulder alignment and follow the approved sample process without overtightening.
• Initial Pumping: Several presses may be required during first use to prime the airless system.
• Compatibility Testing: Test the actual formula, filling temperature and storage conditions before mass production.
• Handling: Keep the nozzle clean and replace the cap after use. Evaluate the filled pack and shipping arrangement for transport.

FAQ

What capacities are available?

Choose 15ml, 30ml or 50ml. The short-description specification table lists the height and diameter for every size.

What distinguishes AP04 from a standard round airless bottle?

AP04 has a higher shoulder sleeve and a screw-on pump assembly. The raised shoulder gives the upper section a distinct profile across all three capacities.

Is this a mono-material airless bottle?

AP04 uses PP for its main components, but its pump contains a metal spring. It is not a fully plastic mono-material version.

What is the minimum order quantity?

The standard MOQ is 10,000 pieces. Confirm the order configuration for the selected capacity, colors and decoration.

Can I customize the color and logo?

Yes. Custom colors and logo decoration can be developed around your artwork, subject to surface suitability and sample approval.

Can I request samples before ordering?

Existing samples can be requested for evaluation. Customized samples usually take 7–10 days depending on decoration. Freight is at the customer’s expense.

What is the production lead time?

Standard production normally takes 30–40 days after artwork, color and sample approval.