AP07j Flip-Top Airless Pump Bottle 1.7, 3.4 & 6.8 fl oz

Flip-Top Airless Pump Bottle

The AP07j flip-top airless pump bottle has an attached hinged lid above a broad dispensing surface. Its 48mm round body is available in seven capacities from 30ml to 200ml. This version offers a different opening experience from an airless bottle with a separate overcap, while retaining an internal piston system.

Product Specifications

• Product Type: Plastic airless pump bottle
• Shape: Round
• MOQ: 10,000 pcs
• Sample Lead Time: 7–10 days for customized samples, depending on decoration
• Production Lead Time: 30–40 days after artwork, color and sample approval
• Delivery Packing: Standard export carton packing, suitable for palletizing

Material

• Cap: PP
• Pump: PP components with a metal spring
• Shoulder: PP
• Bottle: PP

Key Features

• Attached flip-top lid: The hinged cap remains connected to the bottle during use, with no separate overcap to set aside.
• Broad dispensing surface: The top presents a wide pressing surface with a central outlet, as shown in the product close-up.
• Seven size choices: Select from 30ml to 200ml while keeping the same 48mm round body diameter.
• Coordinated PP components: The cap, pump components, shoulder and bottle are PP, with a metal spring inside the pump.

How the Airless System Works

The AP07j flip-top airless pump bottle uses an internal piston instead of a conventional dip tube. As formula is dispensed, the piston rises into the space left behind. This helps limit repeated contact between the remaining formula and outside air. Initial presses may be needed to prime the pump. Confirm dispensing performance with the actual formula and intended fill volume.

Customization Options

• Color: Coordinate injection-molded colors or suitable coated finishes with your brand palette.
• Surface Finish: Discuss matte, glossy, frosted, soft-touch, metallized or gradient effects according to component suitability and sample approval.
• Logo Decoration: Evaluate silk screen printing, hot stamping, heat transfer or labeling against the available decoration area.
• Packaging Development: Confirm artwork placement, accessories and packing for each selected capacity.

Suitable For

Evaluate AP07j for creams and moisturizers suited to its broad dispensing surface. Formula viscosity, ingredients and the required dose affect compatibility. Use filled samples to assess dispensing and storage performance before selecting the pack for a specific formula.

Why This Packaging Works

AP07j is useful when the opening and dispensing routine matters as much as the bottle silhouette. The attached lid stays with the pack, and the broad top can be evaluated for a cream or moisturizer presentation. Its capacity range gives brands room to create several sizes within the same family. Test the actual formula at the outlet and assess lid opening, closing and cleanliness before selecting the final pack.

Filling & Usage Notes

• Filling: Confirm the filling route, piston position and fill level on approved samples. Avoid trapped air and overfilling.
• Assembly and Handling: Open the hinged lid before dispensing and close it after cleaning any residue from the top. Evaluate hinge movement and closure engagement during sample testing.
• Initial Pumping: Several presses may be required to prime the pump during first use.
• Compatibility: Test the actual formula, filling temperature and storage conditions before mass production.

FAQ

How do the ounce sizes in the title relate to the specification?

They are rounded US fluid ounces: 50ml is about 1.7 fl oz, 100ml about 3.4 fl oz and 200ml about 6.8 fl oz. Use the original ml values for fill-volume selection.

What is the minimum order quantity?

The standard MOQ is 10,000 pieces. Confirm the configuration for the selected capacity, colors and decoration.

Can the color and logo be customized?

Yes. Colors and printing can be developed around your artwork, subject to surface suitability and sample approval.

Can I request samples?

Existing samples can be requested for evaluation. Customized samples usually take 7–10 days depending on decoration; freight is at the customer’s expense.

What is the production lead time?

Standard production normally takes 30–40 days after artwork, color and sample approval.

Is this a mono-material pack?

No. The standard AP07j uses a metal pump spring alongside its PP components. Assess the complete pack and local collection requirements before making recycling claims.