FJ01 5–30g Solid-Lid Powder Sifter Jar

Product Overview

FJ01 is an empty loose powder container with sifter for coordinated face-powder ranges. A glossy solid black cap sits over a transparent AS jar and a removable PP insert with round openings. The clear body displays the filled powder shade, while the solid lid offers an uninterrupted surface for brand artwork. Four capacity options let brands maintain the same round presentation across smaller and larger loose-powder formats.

Specification	Details
Product Type	Loose powder container with sifter
Supply Capability	OEM/ODM development and mass-production support
MOQ	10,000 pcs
Sample Lead Time	Approximately 7–10 days for customized samples, depending on color and decoration
Production Lead Time	Typically 30–40 days after artwork, color and sample approval

Material

• Cap: ABS
• Sifter: PP
• Jar: AS

Key Features

• Sifter-guided pickup: In this loose powder container with sifter, the PP insert separates the main reservoir from the area used for brush or puff pickup. Powder release depends on the formula and opening size.
• Wide-mouth filling: The jar opening allows powder to be filled before the removable sifter is seated.
• Visible powder shade: The transparent AS jar allows the filled product color to be seen through the sidewall, helping a shade range remain easy to distinguish.
• Round-hole pattern: Small round perforations in the removable PP sifter distinguish this jar from square-hole designs.
• Solid top presentation: An opaque, full-face lid gives FJ01 a different shelf appearance from a clear-view lid, while keeping the transparent jar body visible below.

Product Structure

• Jar body: Clear round AS jar holds the powder reservoir.
• Sifter insert: Removable PP insert with round holes sits above the powder.
• Outer lid: Solid black ABS lid closes over the sifter.

Customization Options

• Color: Jar, cap and sifter colors can be coordinated for a brand palette, subject to the selected order and production method.
• Surface Finish and Logo: Lid finish, printing and labeling can be discussed for available surfaces. Logo contrast and placement are best approved on a decorated sample.
• Size Selection: This loose powder container with sifter comes in four capacity options. Alternative sifter patterns depend on available tooling and powder-flow testing.

Applications

• Loose setting powder
• Loose finishing powder
• Mineral face powder
• Oil-control translucent powder

A compatible loose powder should pass through the selected round openings without excessive clumping. Powder shade, particle size and pickup can be evaluated with filled samples.

Why This Packaging Works

A loose powder container with sifter gives a powder line a separate pickup surface while keeping the main reservoir below. The solid cap creates a classic top view, and the clear jar displays the filled shade. Four sizes let brands build a coordinated powder range without changing the overall presentation.

Filling and Usage Notes

• Run a fill trial for this loose powder container with sifter using the actual powder, selected fill weight and space needed for the PP insert.
• Check flow, clumping and the amount released by the round openings during realistic brush or puff pickup.
• Remove and reseat the PP sifter as needed during filling, then verify its retention and the lid engagement on the assembled jar.
• Test powder escape, inversion and vibration in the proposed secondary packaging. A sifter alone does not guarantee a sealed shipment.
• Check the AS and PP product-contact components against any fragrance, oils or other ingredients used in the final formula.

FAQ

Can the sifter-hole size be customized?

Hole options depend on available tooling. The chosen powder should be tested for flow and pickup before a sifter configuration is approved.

Can the jar hold mineral powder or loose blush?

Compatible loose mineral powder and loose blush can be evaluated in a sifter jar. Formula flow and pickup should be tested with filled samples.

Can I customize colors or logos?

Jar and cap colors, lid artwork and labeling can be discussed for the selected finish and order. Decorated samples help confirm the final appearance.

Can I request samples and what is the MOQ?

Samples can be discussed for the selected size and decoration. MOQ is 10,000 pcs; customized samples typically take 7–10 days, depending on the project.

What is the production lead time?

Production typically takes 30–40 days after artwork, color and sample approval, depending on the confirmed order.

Which sizes are available with the solid cap and round-hole sifter?

This design is offered in 5g, 10g, 20g and 30g. The size table gives the height and diameter of each item.