RZ6004 5g / 7g Flat Cap Contour Stick Packaging

Product Overview

Information	Details
Product Type	Flat Cap Contour Stick Packaging
Supply Capability	OEM/ODM customization and mass-production support
MOQ	10,000 pcs
Sample Lead Time	7–10 days for customized samples, depending on decoration
Production Lead Time	30–40 days after artwork, color and sample approval

Material

• Outer Cap: PETG
• Inner Cap: PP
• Inner Sleeve: PETG
• Elevator Cup: PETG
• Base: PETG

Key Features

• Flat clear cap: The level top gives a different profile from domed-cap stick packaging.
• Visible internal form: Transparent PETG outer parts make the inner compartment and turning zone visible.
• 5g/7g designation: The 5g/7g format measures 70mm by 27.1mm.
• Top or bottom filling: Both directions are listed for production trials with compatible formulas and equipment.

Product Structure

In the flat cap contour stick packaging, a sleeve surrounds the elevator cup beneath the cap. The base forms the lower housing beneath the stick compartment.

Customization Options

• Color: Custom colors or coordinated component colors, subject to material, MOQ and sample approval.
• Surface Finish: Glossy, matte, frosted, spray coating, metallized effects or aluminum treatments, only where technically supported.
• Logo Decoration: Screen printing, hot stamping, UV printing, labeling or other confirmed methods according to surface and model.
• Component Coordination: Cap, base and shell combinations only when an existing validated configuration permits.

Applications

The flat cap contour stick packaging can be evaluated for:

• Cream contour sticks
• Solid foundation sticks
• Cream blush sticks

Why This Packaging Works

The flat cap provides RZ6004 with a clean, level top, while the transparent walls show the stick assembly. That makes the model recognizable beside rounder or fully opaque contour-stick packaging without claiming a dispensing performance that has not been tested.

Filling and Usage Notes

• Formula compatibility: Test wax or oil content, hardness, shrinkage and any fragrance against the product-contact parts selected for this flat cap contour stick packaging.
• Filling and cooling: Compare top and bottom filling with the intended contour formula; verify product release, rotational travel and cap retention. Establish fill weight, headspace, cooling conditions and stick retention with production-intent samples.
• Mechanism: After filling, check turning travel, raising and retracting behavior, torque and any jamming under normal handling.
• Cap and transport: Verify cap retention, scuffing, deformation and product movement through realistic shipping and use tests. The empty package is not a guarantee of finished-formula performance.

FAQ

Can the color and surface finish be customized?

Color and finish options depend on the chosen model, material and production method. Review available treatments on a decorated sample before confirming the order.

Are these containers suitable for foundation and contour sticks?

The flat cap contour stick packaging is presented for cream contour sticks. Suitability for foundation, contour or another solid makeup formula depends on filling and dispensing tests with the actual product.

Are aluminum, PETG and PP options available?

The collection includes models with aluminum, PETG and PP components. Material assignments differ by model and part; the Material section above identifies the parts used on this page.

What capacities are available?

Capacity varies across the collection. This page offers 5g/7g; compare the size-table rows and test the intended fill with your formula.

Can I request a sample, and what are the MOQ and lead time?

Yes. Customized samples typically take 7–10 days depending on decoration. MOQ is 10,000 pcs, and production usually takes 30–40 days after artwork, color and sample approval.

Can the flat cap on RZ6004 carry branding?

The flat cap offers a defined artwork surface. Confirm logo size, contrast and the chosen decoration on a finished sample.